Once you've Installed your IntelliDose, test to make sure that it is active.

Switch on the power and check that the power light on the front panel is on and that the LCD display has some information on it. 

From here, you need to create your IntelliGrow account

Once you have your IntelliGrow account setup, you can install the IntelliGrow installer. You'll need to select either Windows or Mac setup, depending on what computer/operating system you are using:

Connecting to IntelliGrow on a Mac

Connecting to IntelliGrow with Windows

If you have more than one new controller, connect their USB cables one-at-a-time and when the software asks, provide the requested information. For new or replacement controllers, you'll be asked which grow room it's located in and then to give the controller a name. Use a short meaningful name like Doser1, Climate2 etc so that understanding which device is located in which area is simple to understand as you add more devices.

IntelliGrow will automatically detect any connected controllers and should communicate immediately. You will also see information from the controller(s) on your computer screen. 

Did this answer your question?