Before setting up your Windows PC/laptop for your IntelliDose/IntelliClimate, you will need to keep your PC/laptop running 24/7 for your Intelli devices to have a constant connection to IntelliGrow.

It is advised to change your power & sleep settings:

Select Power & sleep and change "when plugged in, PC goes to sleep after" to Never.

If you haven't already created an IntelliGrow account, please do that first.

Step 1: Download the installer

Click the above button to start downloading the installer.

Step 2: Install the installer

Please install the software as an administrator by right clicking the installer and selecting 'Run as Administrator'. If you have the IntelliGrow Classic software installed, make sure that you close the application before installing IntelliGrow. 

A small window will pop up. Click the ‘Run’ button. 

Follow the step-by-step instructions to install the IntelliGrow installer. 

Step 3: Link your account to the installer

During the IntelliGrow installation process, you will be asked to provide your username and password. Please enter your IntelliGrow username and password and click next.

To access gateway settings page on the PC gateway, enter the following address in the browser:

Step 4: Connect your Devices 

Connect your Autogrow devices by plugging them into your computer's USB port. 

Step 5: Login to IntelliGrow

Login to your IntelliGrow account and you'll see your IntelliGrow devices.

Did this answer your question?